基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Luminescent copolymers for applications in multicolor‐light‐emitting devices

Light‐emitting diodes based on organic materials [organic light‐emitting diodes (OLEDs)] have attracted much interest over the past decade. Several different attempts have been made to realize multicolor OLEDs. This article describes a new approach based on energy transfer in a donor/acceptor system. A copolymer containing both donor and acceptor compounds as comonomer units is prepared. The polymer consists of a derivative of a luminescent dye [4‐dicyanmethylene‐2‐methyl‐6‐4H‐pyran (DCM); acceptor compound], which is copolymerized with fluorene (donor compound) to combine the properties of an electroactive polymer with a highly luminescent dye. Photochemical processing is achieved by UV irradiation of this copolymer in the presence of gaseous trialkylsilanes. This reagent selectively saturates the C?C bonds in the DCM comonomer units while leaving the fluorene units essentially unaffected. As a result of the photochemical process, the red electroluminescence of the acceptor compound vanishes, and the blue‐green electroluminescence from the polyfluorene units is recovered. Compared with previous approaches based on polymer blends, this copolymer approach avoids problems associated with phase‐separation phenomena in the active layer of OLEDs. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4317–4327, 2006     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

Methods in carbon K-edge NEXAFS: Experiment and analysis

Near-edge X-ray absorption spectroscopy (NEXAFS) is widely used to probe the chemistry and structure of surface layers. Moreover, using ultra-high brilliance polarised synchrotron light sources, it is possible to determine the molecular alignment of ultra-thin surface films. However, the quantitative analysis of NEXAFS data is complicated by many experimental factors and, historically, the essential methods of calibration, normalisation and artefact removal are presented in the literature in a somewhat fragmented manner, thus hindering their integrated implementation as well as their further development. This paper outlines a unified, systematic approach to the collection and quantitative analysis of NEXAFS data with a particular focus upon carbon K-edge spectra. As a consequence, we show that current methods neglect several important aspects of the data analysis process, which we address with a combination of novel and adapted techniques. We discuss multiple approaches in solving the issues commonly encountered in the analysis of NEXAFS data, revealing the inherent assumptions of each approach and providing guidelines for assessing their appropriateness in a broad range of experimental situations.     

合肥同步辐射软X射线显微术研究

合肥国家同步辐射实验室首期建设的光束线之一用于软Ｘ射线显微成像研究。实验站现已装置初型的扫描透射Ｘ射线显微镜，并正在进行亲一代的扫描显微建设，同时还使同步辐射光进行接触软Ｘ射线呈微成像研究，并对选取的一些生物样品进行了成像试验。本文介绍了合肥同步辐射光源上软Ｘ射线显微术实验线站的建设及完成的一些实验结果。     

Effect of a thermal radiation field on the γ-luminescence of alkali-silicate glass

We revealed the changes in the γ-luminescence spectra under the influence of a thermal radiation field on high-purity alkali-silicate glasses (I) and those with addition of Fe³⁺ ions (II). We explain the obtained results within the framework of the L-model of edge absorption and electron-hole recombination processes. Samarkand State University, 15, Universitetskii Bul., Samarkand, 703004, Republic of Uzbekistan. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 453–455, May–June, 1998.     

Gamma radiation effects on an amine antioxidant added in an ethylene-propylene copolymer

The aim of this work was to compare the gamma radiation induced effects on samples of an ethylene-propylene copolymer antioxidant free with samples loaded with an antioxidant characterised by the presence of an -NH functional group. The employed techniques were Electron Spin Resonance spectroscopy (ESR) and High Performance Liquid Chromatography (HPLC). Stable radicals R---NO° due to the interaction of free radicals produced in the irradiated polymer with the antioxidant have been observed by ESR at room temperature. The time evolution of the ESR signals following the irradiation was examined at different doses. The amount of antioxidant not involved in the oxidation reactions has been determined using HPLC.     

NFZ-10工业辐照电子直线加速器

研制的电子直线加速器ＮＦＺ－１０的辐照加工能力相当于３０ＰＢｑ的６０Ｃｏ源，电子束能量为４～１２ＭｅＶ，平均束功率为３ｋＷ，扫描宽度为１ｍ，能量不稳定度≤±０．５％，束流不稳定度≤±０．６％，扫描不均匀度≤±２．５％。ＮＦＺ－１０加速器已被用于辐照各种电力半导体器件，一年多来运行稳定可靠并获得较好的经济效益。     

The effect of UV light on the thermooxidative stability of linear low density polyethylene films crosslinked by ionizing radiation

The effect of ultraviolet (UV) light on the thermooxidative stability of Linear Low Density Polyethylene(LLDPE) films was studied. LLDPE was stabilized with phenolic type antioxidant known as Irganox 1010, hindered amine light stabilizer known as Chimmasorb 944 and phenolic type gamma stabilizer. The influence of these additives on the thermooxidative stability of gamma and UV irradiated LLDPE were investigated by isothermal Differential Scanning Calorimeter (DSC). The oxidation induction time (OIT) experiments indicate that antirad free LLDPE films which contains antioxidant and UV stabilizer are more sensitive to gamma and UV radiation. On the other hand, films which contain antirad and irradiated to different doses of γ-radiation demonstrated improved thermooxidative stability.